上海智鸢机电设备有限公司

机电资讯NEWS

机电行业动态、机电技术文章
Mechanical and Electrical technical articles. industry dynamic..

Turck转速监视器-德国Turck速度传感器MS25-Ui

发表时间:2019-04-19 11:26 作者:智鸢机电 来源:www.zhiyuanjd.com.cn 浏览:

分类:智鸢机电 > 机电资讯 > 机电行业动态 >
智鸢机电 :

德国Turck速度传感器MS25-Ui性能:

电流/电压转换频率,监控范围:10 mHz ... 1 660 Hz(0.6 ... 100 000 min-1),监控线路断线/短路。可拆卸接线端子,出色的温度稳定性,脉冲输出,浮动平均信号稳定。完全电隔离,输入反极性保护。

转速监视器MS25-UI转换模拟电流的数字输入频率和电压信号,相对于调整后的测量范围。

该装置通过3线PNP传感器控制,传感器符合EN 60947-5-6或信号脉冲电平为5…30 Vdc的电源。

Turck转速监视器

测量范围用四个数字设定指轮开关的范围介于0.6…100000 min-1或0.01…1660 Hz。这个范围对应于20的输出信号MA或10 V。速度低于0.6分钟-一/0.01赫兹引线至0/4毫安的输出信号或0 V电压为0…10 V的信号可用输出和0/4…20 mA电流信号输出。输出电流可以改变通过桥接夹具13/14。

The rotation speed monitor MS25-UI converts the digital input frequency to analog current and voltage signals, relative to the adjusted measuring range. The device is controlled via 3-wire pnp sensors, sensors acc. to EN 60947-5-6 or signal sources with pulse levels of 5…30 VDC. The measuring range is set digitally with four thumb wheel switches in a range between 0.6…100,000 min-1 or 0.01…1660 Hz. This range corresponds to an output signal of 20 mA or 10 V. Speed rates lower than 0.6 min– 1 /0.01 Hz lead to an output signal of 0/4 mA or 0 V. A 0…10 V signal is available at the voltage output and a 0/4…20 mA signal at the current output. The output current can be changed from 0…20 mA to 4…20 mA by bridging the clamps 13/14.


欢迎光临 上海智鸢
在线客服

全国销售热线:
021-63806979

电子邮件email:
zhiyuanjd@163.com